Results 1 to 2 of 2

Thread: Shimano TRANX 400

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Junior Member
    Join Date
    Jan 2017
    Location
    Des Moines
    Posts
    19

    Shimano TRANX 400

    I backed my star drag off of my Tranx 400 for winter storage and now I can't get it to re-engage.
    This weekend I began cleaning and lubing my reels per the norm and when I started working on my TRANX I couldn't get the real to engage to spool on new line.
    I took the side plate off to see if the gears meshed and they appear OK, but as I increased (no where near too tight) the drag setting the handle would turn but the spool wasn't.
    Has anyone ran into this issue and do you have any suggestions?

    Thanks

  2. #2
    Member
    Join Date
    Apr 2004
    Location
    CANADA.
    Posts
    32
    My suggestion is what I have done. Send your reel to your local Shimano Service Centre
    and have them look at and service everything while they have it. It really is great for peace of mind. My turnaround in Canada was one week! In addition a worn bearing in my Tranx 500 was replaced.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •